En10305-1 Automobile and Motorcycle Steel Pipe

Model NO.: HTSP EN10305-1 Technique: Cold Drawn Surface Treatment: Oiled Section Shape: Round Wt: Sch40 Sch80 Steel Grade: E215 E235 E355 Main Market: Asia, Middle East, Europe, etc. Specification: 6-68MM HS Code: 7304391000 Type: Seamless Material: Carbon Steel Usage: Hydraulic/Automobile Pipe Od: 6-68mm Length: as Customer Request Delivery Time: 30-50 Days Trademark: HTSP Origin: China

Product Name	E215 Steel Pipe	E235 steel pipe	E355  steel pipe
chemical analysis	C:≤0.10;Si:≤0.05;Mn:≤0.70;P:≤0.025; S:≤0.025;Al:≤0.025	C:≤0.17;Si:≤0.35;Mn:≤1.20;P:≤0.025; S:≤0.025	C:≤0.22;Si:≤0.55;Mn:≤1.60;P:≤0.025; S:≤0.025
Tensile Strength	+C,≥430MPa; +LC,≥380MPa;+SR,≥380MPa;+A,≥280MPa;+N,290-430MPa	+C,≥480MPa; +LC,≥420MPa;+SR,≥420MPa;+A,≥315MPa;+N, 340-480MPa	+C,≥640MPa; +LC,≥580MPa;+SR,≥580MPa;+A,≥450MPa;+N,490-630MPa
Yield strength	+SR,≥280MPa; +N,≥215MPa	+SR,≥350MPa; +N,≥235MPa	+SR,≥450MPa; +N,≥355MPa
Standard	EN10305-1
Length	As customer's request
Packaging	Standard export packing, packed in woven bags, with two nylon slings, or can be customized as request
Heat Treatment/      Delivery Condition	Cold finished (hard)   BK(+C) Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation Cold finished (soft)    BKW(+LC) The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding) Cold finished and stress-relieved annealing BKS(+SR) Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree. Annealed    GBK(+A) The last Cold forming process is followed by annealing in a controlled atmosphere. Normalized   NBK(+N) The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere.
Delivery Time	Within 35-50 days from receiving deposit
Payment Term	100% L/C at sight or 30% deposit, 70% balance against copy of B/L
Usage/Application	Pipes for automobile and motorcycle
Main Market	Asia, Middle East, Europe, etc.

Contact us if you need more details on Steel Pipe. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Seamless Steel Pipe、Seamless Steel Tube. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Precision Steel Pipes > Automobile Steel Pipe